Preparation; Checking The Installation - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Preparation

If you have any problems with the installation, contact your dealer or the service technician that
performed installation.
Reasons for water leakage
 Are you using Hitachi's new one-touch joint
(supplied) for the connection to the tap?
 Is the connection to the tap loose?
 Is the union nut firmly connected to the
machine? (Installation Instructions)
Reasons for stops and abnormal sounds
and vibration during the spin cycle
 Is the machine installation level?
 Is the air bubble in the spirit level inside the
circle? (Installation Instructions)
Circle
Air
bubble

Checking the installation

(P. 6)
 View the spirit level
from directly above.
If problems occur during use,
see
Reasons for abnormal drainage
 Is the drain hose elevated more than 10 cm
above the ground?
 Is the drain hose firmly attached to the drain
outlet? (Installation Instructions)
The drain hose must not be elevated more than
10 cm when going over a threshold, for example,
and its total length must be 2 m or less.
10 cm or less
2 m or less
(P. 79 to 96).
5