Operation Times - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Symptom
Socks and
handkerchiefs get
caught between
the inside of the Is the wash load large?
door and the door
bellows during
operations.
Drops of water
form on the inside
 These drops of water are due to the splashing
and bottom of
that occurs during the wash and spin
the door and the
operations.
door bellows after
operations.
Did you wash a lot of items made of cotton?
 Although Tangle-Free Finish is performed at
the end of the [FUZZY] program's spin cycle,
cotton items may not untangle sufficiently.
Are you running [WASH DRY] for small loads of
Laundry sticks
laundry?
to the walls of
 The drying operation operates while the
the drum after
laundry is stuck to the drum.
operations.
Did you disable the Tangle-Free Finish function?
 Does the laundry stick regardless of the
above?
The power turns
off when spin
Was Tangle-Free Finish in progress?
operations are
paused.
Are you running the [STATIC DRY] or [SILENT]
program?
Water is consumed
during drying Is the Water-Cooling Mode set?
operations.
 Depending on the operating environment and
pipe conditions, some water may be consumed.
Did the laundry gravitate to one side during the
spin operation?
 If so, the operation time will be longer, as
an operation to correct this is automatically
added.
Did you add additional laundry during a wash
operation?

Operation times

 If you add laundry while an operation is in
are long.
progress, the increase to the original detected
weight may increase the operation time.
 The actual operation time may differ from
the original remaining time indication, as it
changes depending on the type and size of
the laundry items and the temperature of the
air and water.
Possible cause Solution
When washing larger loads, separate underwear,
handkerchiefs, and smaller items into a
commercially available mesh laundry bag.
Place smaller items into the back of the drum first,
and then load the remaining laundry.
Use the optional washing cap.
If this is a concern, wipe the water with a dry cloth.
Use the [SOFT] program.
If the Tangle-Free Finish function is disabled,
enable it. (P. 69)
Increase the number of laundry items.
For details on the Tangle-Free Finish setting, see
(P. 69).
We recommend using a fabric softener.
This is not a malfunction.
When you pause during a Tangle-Free Finish
operation, the power turns off to end the
operation.
This is not a malfunction.
This is not a malfunction.
For details on the air / water cooling
dehumidification modes, see
This is not a malfunction.
Load laundry into the drum carefully to avoid
concentration on one side. (P. 19, 20)
This is not a malfunction.
This is not a malfunction.
(P. 98)
(P. 70).
89