Pause Time - Canon imageRunner 2020 Facsimile Manual

Pause Time

Some overseas dialing may be affected by the distance or complex routing of
connections when dialing the international access code, country code, and the
destination's telephone number all at once. In such cases, insert a pause after the
international access code. When the machine dials the number, it will pause where
the pause was inserted in the number. This helps to improve the connection.
NOTE
•
You can insert a pause when you dial the fax number using the numeric keys. (See
"Regular Dialing," on p. 2-3.)
•
Pauses entered at the end of dialed fax numbers are always 10 seconds long.
•
The default setting is two seconds.
Additional
1
Functions
6
OK
2
OK
3
OK
6-14 Transmission Settings
Press [Additional Functions] ➞ [
SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Adjusting the Line Monitor
Volume," on p. 6-2.
Press [ ] or [
press [OK].
Press [ ] or [
press [OK].
] or [
] until <TX SETTINGS> appears ➞
] until <PAUSE TIME> appears ➞
] until <FAX