Two-Sided Originals
You can set the machine to automatically scan both sides of two-sided originals that
are placed in the feeder without the need for turning over the sheet manually.
IMPORTANT
•
The Two-Sided Original mode is available only if the Feeder (DADF-P1) is attached.
•
The Two-Sided Original mode cannot be used with the Direct Sending mode.
•
When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally into the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
1
Place your originals into the feeder ➞ press [FAX].
FAX
The FAX indicator lights and the machine enters the Fax Standby mode.
2
Two-Sided
Press [Two-Sided] ➞ [
TYPE>, or <CALENDER TYPE> ➞ press [OK].
Details of each item are shown below.
<OFF>:
OK
<BOOK TYPE>:
<CALENDAR TYPE>:
] or [
] to select <OFF>, <BOOK
Documents are not scanned using the Two-Sided
original mode.
The front and back sides of the original have the same
top-bottom orientation.
The front and back sides of the original have opposite
top-bottom orientations.
Two-Sided Originals
3-17
3