Facsimile Control Panel - Canon imageRunner 2020 Facsimile Manual

■ Facsimile Control Panel

a One-Touch Speed Dialing Panels
Open the first panel to display one-touch speed
dialing keys 21-40. Open the second panel to
display keys 41-60.
b One-Touch Speed Dialing keys
Dial numbers registered under one-touch speed
dialing keys.
c Direct TX key
Sets the machine to the Direct Sending mode so
you can send a document immediately ahead of
other documents stored in memory.
d Delayed TX key
Press to specify a time for the machine to
automatically send your documents.
e Pause key
Insert a pause between digits or after the entire
telephone number when dialing or registering
facsimile numbers.
f Redial key
Redial the previous number that was dialed
manually by using the numeric keys.
g Coded Dial key
Press [Coded Dial], followed by a three digit code
to dial the telephone number registered for coded
speed dialing.
h Address Book key
Press to search for names or fax numbers that
have been registered for speed dialing, and then
use the number for dialing.
i FAX key
Press to switch the machine to the Fax mode.
j COPY key
Press to switch the machine to the Copy mode.
k Hook key
Press to activate or deactivate the telephone line.
This is necessary for dialing a fax information
service. (See "Fax Information Services," on
p. 3-19.)
l Stamp key
Press [Stamp] to apply a stamp on the front side
of originals after they have been scanned, so that
you can determine whether a document was
scanned and sent.
Control Panel Parts and Functions
1
1-7