Memory Sending - Canon imageRunner 2020 Facsimile Manual

Memory Sending

All of the originals to be sent are first scanned and read into memory, then sent.
Memory Sending takes place unless Direct Sending is specified.
NOTE
•
You can register a new fax job while the machine is waiting to redial the recipient's
number automatically. For details on how to set the machine to redial automatically, see
"Auto Redial," on p. 6-15.
•
You can store up to 70 fax jobs for sending or approximately 1,000 pages in memory.
This is based on the condition that the sender sends the fax by the imageRUNNER 2020/
2016 with ITU-T No.1 Chart standard mode.
•
The number of pages you can scan into memory differs depending on the amount of
memory remaining in the machine and the type of document you are scanning.
•
If the memory becomes full while you are scanning a document, <MEMORY FULL> will
appear in the LCD display. In this case, delete unnecessary documents. (See "Using the
System Monitor Key," on p. 1-44, and "Using the System Monitor Key," on p. 4-11.)
1
Place your originals ➞ press [FAX].
FAX
The FAX indicator lights and the machine enters the Fax Standby mode.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
2
Select the desired send settings.
For instructions on selecting the send settings, see:
•
"Image Quality," on p. 3-8
•
"Scan Density," on p. 3-11
Sending Methods 3-3
3