Adjusting the TX REPORT Setting
The machine can print a TX (Transmission) report (TX REPORT or ERROR TX
REPORT) after sending a document. You can set the machine to print a report
every time it sends a document (TX REPORT), or only when an error occurs (TX
ERROR REPORT). You can also set the machine to not print the report at all. By
factory default, the machine is set to print a TX report only when an error occurs.
NOTE
The default setting is ERROR TX REPORT.
■ TX REPORT
8
■ ERROR TX REPORT
NOTE
The machine does not print a TX report when faxing the documents from your computer,
see Chapter 3, "Fax Driver Options," in the Fax Driver Guide.
8-6
Adjusting the TX REPORT Setting
08/03/2005 10:50 FAX 123XXXXXX
TRANSMISSION OK
TX/RX NO
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
08/03/2005 10:50 FAX 123XXXXXX
************************
***
************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
CANON
*******************
TX REPORT
***
***
*******************
0004
111XXXXX
08/03 10:50
00' 11
1
OK
CANON
ERROR TX REPORT
***
0005
111XXXXX
08/03 10:50
00' 0 0
0
NG
# 0018 BUSY/NO SIGNAL
001
001