Figure 4-19 Removing The Cf Card - NEC SL1100 Hardware Manual

ISSUE 1.0
CF card
11. Replace the Main-Cover and Sub-Cover.
12. Turn the system power back on.
13. When the system has completed reloading the software, the RUN LED (D1) will flash blue.
• To confirm the new software version number, press the Navigation key on any display telephone to view the
system version number see
• The existing system data in the flash memory is replaced, but the customer data (stored in the RAM) is
saved.
Hardware Manual

Figure 4-19 Removing the CF card

Main Software Version Confirmation on page
CPU card
CF Slot (CN2)
VMDB
4-8.
SL1100
4-11