ISSUE 1.0
3.3.2 Mounting the 4COIDB PCB
1. Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1 PCB.
Figure 2-69 Plastic Knockouts on 084M-B1/080E-B1/008E-B1
2. Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
4COIDB-B1 PCB.
3. Mount the 4COIDB-B1 PCB onto the 084M-B1/080E-B1/008E-B1 PCB using two Nylon-spacers
and one screw. (Refer to
4. Attach the 4COIDB Label to the specified position on the 084M-B1/080E-B1/008E-B1 PCB.
J1
Nylon-Spacers
J3
084M-B1/080E-B1/008E-B1 PCB
The 4COIDB-B1 cannot be mounted on the 1PRIU-C1 PCB.
5. Mount the 4COIDB-B1 with 084M-B1/080E-B1/008E-B1 PCB into the KSU.
Hardware Manual
Plastic Knockout
Plastic Knockout
Figure 2-70 Installing the 4COIDB-B1 on this
Figure 2-70 Installing the 4COIDB-B1
084M-B1
080E-B1/008E-B1
page)
4COIDB-B1 PCB
Screw
Metal-Spacer
4COIDB Label
Screw
SL1100
2-43