Installing The Dss Console; Dss Console Leg Adjustment; Figure 2-100 Low Position Setting; Figure 2-101 Cabling Of Dss - NEC SL1100 Hardware Manual

ISSUE 1.0
Plug the Optional AC-[ ] AC adapter input jack in the telephone base unit, and plug the 2-prong wall
plug of the AC adapter in AC outlet.
• PoE(IEEE802.3af)
PoE (Power Over Ethernet) is a LAN technology that allows standard 10Base-T/100Base-TX data
cables to pass electrical current from a power source to a requesting end device.

5.3 Installing the DSS Console

The 60D DSS-B Console can be installed on any digital extension port of each 084M-B1/080E-B1 card
directly. The pair extension for the DSS Console is assigned using system programming.
For the settings, refer to the SL1100 Features & Specifications Manual.

5.3.1 DSS Console Leg Adjustment

The DSS Console provides the leg for angling the console to best suit each user. The leg can be set
for two different heights (Low/High).
5.3.1.1 Low Position Setting
1. Turn DSS Console over (button side down).
2. Adjust the legs to desired height.
Leg
3. Lead the Line cord through the applicable grooves.
5.3.1.2 High position setting
1. Turn DSS Console over (button side down).
2. Pull up the Leg Stoppers.
Hardware Manual

Figure 2-100 Low Position Setting

Figure 2-101 Cabling of DSS

< Low position >
SL1100
2-63