Figure 2-42 Assemble Battery Box Base - NEC SL1100 Hardware Manual

ISSUE 1.0
1. Using four supplied screws, secure the WM Support to the FM/WM Base-F and Base-R.
WM Support
FM/WM Base-F
2. Refer to Figure 2-43 Wall-Mount Spacing Guide on the next page
drilling holes for 10 mm anchor bolts (locally procured).
Mark and drill the four holes required to install the FM/WM Base.
3. Using anchor bolts, secure the FM/WM Base to the wall.
Hardware Manual
Four Screws
(M4 X 8)

Figure 2-42 Assemble Battery Box Base

FM/WM Base-R
for required spacing before
SL1100
2-27