Program 42 : Hotel Setup; System Options For Hotel/Motel - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
Use Program 42-01 : System Options for Hotel/Motel to assign the system options for Hotel/Motel
Service.
Input Data
Item Item
No.
01 Answering Message
Mode for Wake Up
Call (Hotel Mode)
02 Wake Up Call Mes-
sage Assignment
03 Wake Up Call No An-
swer
04 Setup Message Mode
for Wake Up Call (Ho-
tel Mode)
05 Wake Up Call Mes-
sage Assignment
06 Flexible Room Status
07 Snooze Callback Tim-
er
08 Snooze Callback Set-
ting Dial
Conditions
None
Programming Manual

Program 42 : Hotel Setup

42-01 : System Options for Hotel/Motel

Input Data
0 = MOH (Hold Time)
1 = VAU Message
2 = VAU Message +
Time
0 ~ 100 VAU Message for Wake Up Calls. You
(0 = No Setting) must make an entry for this program if you
have selected 1 or 2 in Item 01 above.
0 = No Transfer
1 = Transfer to the Oper-
ator
0 = Confirmation Tone It sets mode for confirming set up when a
1 = VAU Message user setting the wakeup call.
2 = Time Stamp + VAU When a user selects 0 (Fixed Message)
Message they should hear "was setting".
3 = Play Fixed VRS When a user selects "Play Fixed VRS
Message + Time Message + Time" they should hear the fol-
lowing:
"A wakeup call has been set for [the wake-
up call time in 12 hour format] "
An example of this is:
"A wakeup call has been set for 8:30 AM"
0 ~ 100
(0 = No Setting)
0 = Off When PRG42-01-06 is set to on, any room
1 = On status change from any status can be
made.
Ex)
Hotel Status Code 4 -> 3
Hotel Status Code 4 -> 4
0 ~ 30 (minute) After answering to a Wakeup Call, to set
(0 = Not activated) the time that Snooze Callback is activated.
If set to 0, Snooze Callback does not ac-
*
tivated.
0 ~ 9, * , # After answering to a Wakeup Call, to set
Up to 1 digits the dial of Snooze Callback setup.
Description
SL2100
Program
42
Default
0
0
0
0
0
0
10
1
2-411