System Options For Multiline Telephones - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
Program
multiline telephones.
20
Input Data
Item
No.
01 Trunk Loop Key
Operation Mode
04 Retrieve the Line
After Transfer
05 Headset Busy
Mode
06 Pre-selection Time
07 Display mode of
Date and Time
08 LCD Display Hold-
ing Time
09 Disconnect Super-
vision
2-182
Program 20 : System Option Setup

20-02 : System Options for Multiline Telephones

Item
0 = Keep Lamp
1 = Extinction
Mode 0 = Keep Lamp
Incoming :
Talking : Green Lighting
(on Talking TEL)
Holding :
blink (on holding
0 = Extinction
1 = Keep Lamp
0 = No (Disable)
1 = Yes (Enable)
0 ~ 64800 seconds
1 ~ 10
0 ~ 64800 seconds
0 = Disable (Off)
1 = Enable (On)
Input Data
1 = LED Off
300 IPM Red blink
LED Off
60 IPM Green LED Off
TEL)
Program 20 : System Option Setup
ISSUE 2.0
Description Default
1
Enable (1) or dis- 1
able (0) an exten-
sion ability to an-
swer a call after it
has been trans-
ferred, but before
it is answered.
Set the condi- 0
tions under which
a headset exten-
sion is busy to in-
coming callers.
When a multiline 5
terminal user pre-
selects a line key,
the system re-
members the pre-
selection for this
time.
Set how the Time 3
and Date appear
on display tele-
phones. There
are eight display
modes.
5
Use this option to 1
enable or disable
disconnect super-
vision for the sys-
tem trunks.
Related
Program
20-09-07