Codec Filter Setup For Analog Station Port - NEC SL2100 Programming Manual

ISSUE 2.0
Program 82 : Basic Hardware Setup for

82-07 : CODEC Filter Setup for Analog Station Port

Level:
IN
Description
Use Program 82-07 : CODEC Filter Setup for Analog Station Port to set the filter value of the
CODEC (QSLAC) filter of each analog port.
Input Data
Station Port Number
Item Item
No.
01 CODEC Filter Type
Conditions
• When the Side Tone level was so laud or small on the default, check the Side Tone by a customer
site using the following data and establish something best for the side tone.
• Do not change the data from the default when the side tone is no problem.
Feature Cross Reference
• Direct Station Selection (DSS)
Programming Manual
Input Data
0 = No filter
1 = Type 1: Line loss 0dB
2 = Type 2: Line loss 4dB
3 = Type 3: Line loss 8dB
4 = Type 4: Not Used
5 = Type 5: Not Used
6 = Type 6: Not Used
7 = Type 7: Not Used
8 = Type 8: 600 ohms North America
9 = Type 9: Not Used
10 = Type 10: Not Used
11 = Type 11: Not Used
12 = Type 12: Not Used
13 = Type 13: Not Used
14 = Type 14: 600 ohms 0dBr
15 = Type 15: Not Used
SL2100
Extension
1 ~ 128
Default
2 (: Type 2: Line loss
4dB)
2-523
Program
82