NEC SL2100 Programming Manual page 161

ISSUE 2.0
Item Item
No.
27 Handset Volume
28 Message Waiting
Lamp Color
29 PB Back Tone
Level
30 Toll Restriction
Class
34 Call Register
Mode
35 Message Waiting
Lamp Cycle for
Calling Exten-
sion
36 Message Waiting
Lamp Cycle for
Called Extension
37 Voice Mail Mes-
sage Wait Lamp
Color
38 Voice Mail Mes-
sage Wait Lamp
Cycle
40 Additional Dial
for Caller ID Call
Return
41 Incoming Ring
Setup
42 Incoming Off-
Hook Ring Setup
Programming Manual
Input Data
0 = Back to Default Determine how an extension hand-
(Back) set volume is set after it is adjusted
1 = Stay at previous during a call.
level (Stay)
0 = Green Determine whether an extension
1 = Red Message Waiting Lamp lights Green
(0) or Red (1) when a message is
received.
1 ~ 57 (- 15.5 dB ~ This program allows adjustment of
+ 12.5 dB) the PB Back Tone Level when you
are calling an ISDN Line.
0 = Virtual Extension Select the Toll Restriction Class to
(Follows virtual exten- use when placing a call from a virtu-
sion Toll Class in PRG al extension.
21-04.)
1 = Real Extension
(Follows physical sta-
tions Toll Class in PRG
21-04.)
0 = Trunk Mode The Caller ID Scroll stores Trunk
1 = Extension/Trunk calls only (0), or both Internal and
Mode Trunk calls (1).
1 = Cycle 1 Select the cycle method that the
2 = Cycle 2 Large LED flashes when the exten-
3 = Cycle 3 sion has set Message Waiting.
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
1 = Cycle 1 Select the cycle method that the
2 = Cycle 2 Large LED flashes when the exten-
3 = Cycle 3 sion has Message Waiting set to the
4 = Cycle 4 extension.
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
0 = Green Select the color of the Large LED
1 = Red when a voice mail message is wait-
ing at the extension.
1 = Cycle 1 Select the cycle method that the
2 = Cycle 2 Large LED flashes when the exten-
3 = Cycle 3 sion has a VM Message Waiting set
4 = Cycle 4 to the extension.
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Up to four digits (0, 1 ~ Enter the digits to be dialed in front
9, #, * ) of the Caller ID when using the Call-
er ID Return function.
0=Speaker Normal
Ring
1=Headset Ring
0=Speaker Off-Hook
Ring
1=Headset Off-Hook
Ring
Description
When 1 is assigned in this pro-
gram and a user sets the volume
to maximum, the volume is reset
to a level to meet FCC standards
when the user hangs up.
SL2100
Default Related
Program
1
1
32 (0 dB)
1 15-02-21
0
3
2
1
2
No Setting
0 11-11-37
11-11-62
15-02-12
15-02-42
20-13-06
0 11-11-37
11-11-62
15-02-12
15-02-41
2-137
Program
15