Class Of Service Options (Incoming Call Service) - NEC SL2100 Programming Manual

ISSUE 2.0

20-09 : Class of Service Options (Incoming Call Service)

Level:
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Input Data
Class of Service Number
Item Item
No.
01 Second Call for
DID/
DISA/DIL/E&M
Override
02 Caller ID Display
04 Notification for
Incoming Call
List Existence
05 Signal/Voice Call
06 Incoming Time
Display
07 Call Queuing
09 Deny Collect Call
Receiving
Programming Manual
Program 20 : System Option Setup
Input Data
0 = Off (2nd call will not Turns off or on the extension ability
be allowed.) to receive a second call from a DID,
1 = On (2nd call is al- DISA, DIL, or tie line caller.
lowed.)
0 = Off Turns off or on the Caller ID display
1 = On at an extension.
0 = Off Determines whether or not an ex-
1 = On tension display shows Check List
when an incoming call is missed by
a user.
0 = Off Turn off or on an extension ability to
1 = On enable Handsfree Answerback or
Forced Intercom Ringing for their in-
coming Intercom calls.
0 = Off
1 = On
0 = Off (Calls are not Turn off or on an extension ability to
queued.) have calls queued if a call rings the
1 = On (Calls are extension when it is busy.
queued.)
0 = Off
1 = On
1 ~ 15
Description
With this option set to 1, the des-
tination extension must be busy
for a second DNIS caller to ring
through. If the destination exten-
sion does not have a trunk key
available for the second call and
a previous call is ringing the ex-
tension but has not yet been an-
swered, the second caller hears
busy regardless of this program
setting.
On TELPro/WebPro/PCPro
Item name is changed to "2nd
External Call" from "2nd Cal
DID Ovrride".
SL2100
Default Related
Program
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1 11-11-15
11-11-16
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1 20-13-06
COS 1 ~ 15 = 1 20-09-09
2-193
Program
20