System Alarm Report Setup - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
Use Program 90-11 : System Alarm Report Setup to define the details of the system alarm report.
Input Data
Item Item
No.
02 Report Method
06 SMTP Host Name Up to 255 Characters
07 SMTP Host Port
Number
08 To E-mail Ad-
dress
09 Reply Address
10 From Address
13 Customer Name
14 Change SMTP
Client
15 DIMLOG Notifica-
tion
Conditions
None
Programming Manual
Program 90 : Maintenance Program

90-11 : System Alarm Report Setup

Input Data
0 = No Report When alarm reports are e-mailed,
1 = E-mail Address set this option to 1. E-mail address
set in 90-11-08.
When alarm reports are e-mailed,
set the SMTP name (ex : smtp.your-
isp.com). Contact your ISP (internet
service provider) for the correct en-
try if needed.
0 ~ 65535 When alarm reports are e-mailed,
set the SMTP host port number.
Contact your ISP (internet service
provider) for the correct entry if nee-
ded.
Up to 255 Characters When alarm reports are e-mailed,
set this e-mail address to which the
report should be sent.
Up to 255 Characters When alarm reports are e-mailed,
set the e-mail address where replies
should be e-mailed.
Up to 255 Characters When alarm reports are e-mailed,
set this e-mail address for the sta-
tion sending the report.
Up to 255 Characters When alarm reports are e-mailed,
enter a name to identify the particu-
lar system.
0 = No When enabled the system uses the
1 = Yes programs in 47-18-xx for email serv-
er integration.
0 = No When enabled, the system will send
1 = Yes an email notification when a system
fault occurs and DIMLast/DIMDump
files are generated. If PRG 90-11-14
is also enabled the logs files will be
attached to the email.
Description Default
No Setting
No Setting
No Setting
No Setting
No Setting
SL2100
Program
90
Related
Program
0
25
0 90-11-08
90-25-01
47-18
47-19
90-11
0 90-11-14
2-593