Pms Service Setting - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use PRG 42-06 : PMS Service Setting to set the PMS integration Settings.
Program
42 Input Data
Item
No.
01 PMS Port Number
02 3:00 AM Auto Room
Scan
03 CheckIn Message
Type
04 CheckOut Auto Sta-
tus Change
05 AREYUTHERE/LINET-
EST Send Timing
06 AREYUTHERE/LINET-
EST Send Count
07 Check-Out Auto Flexi-
ble Status Change
08 Status for Check-Out
Auto Flexible Status
Change
Conditions
None
2-418
Item Input Data
0 ~ 65535
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
1 ~ 128 seconds
0 ~ 20 (times)
0 = Off
1 = On
1 = Room Clean(Occu-
pied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Re-
quest
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean(Vacant)
= Reserve 5
*
# = Reserve 6
Program 42 : Hotel Setup

42-06 : PMS Service Setting

Description
Determine the TCP port the application
should connect to for the integration
stream.
Determine if the system scans the status
of Hotel rooms at 3:00 AM.
Determines whether a check-in or Out
Message is sent when the action is per-
formed on the PBX.
Determines the room status when a room
is checked out.
Defines the time that passes after any
PMS message sent from the PBX that the
PBX sends an AREYUTHERE message.
This is the retry count for un-acknowl-
edged AREYUTHERE messages.
When PRG 42-06-07 and PRG 42-06-04
are set to on, the status programmed with
PRG 42-06-08 can be set upon checkout
regardless of the previous status.
When PRG 42-06-07 is set to on, the sta-
tus programmed with PRG 42-06-08 can
be set upon checkout.
ISSUE 2.0
Default
5129
0
0
0
10
3
0
4
Program 42 : Hotel Setup