Group Service Through Pms - NEC NEAX2400 IMX Features Manual

G-4
General Description
Group service information is entered via the PMS and forwarded to the NEAX2400 IMX for storage. This enables
the Console, or predetermined Special Administration Stations, to activate various ANNOUNCEMENT
SERVICES [A-15] on a group basis. Ten different types of announcements can be provided for group service.
System limitations are as follows:
64 Groups standard
80 Guest rooms per group maximum for 1 IMG configuration
255 Guest rooms per group maximum for 4 IMG configuration
10 Announcement types maximum
1 Digit maximum for announcement-type code (0-9)
6 Digits maximum for group code
If PMS Language Service is used, announcements can be provided according to a group's language. The language
information is entered from the PMS terminal.
Operating Procedure
• To set GROUP SERVICE THROUGH PMS from a predetermined Special Administration Station:
Step
Lift the handset.
1
Dial the Group Announcement code.
2
Dial time (24-hour time).
3
Dial ID code (if used).
4
Dial Group code and Group Announcement type code. Receive service set tone.
5
Hang up.
6
Note:
If ID codes are not used, special dial tone will be heard after Step 3.
To cancel GROUP SERVICE THROUGH PMS from a predetermined Special Administration Station:
•
Step
Lift the handset.
1
Dial the cancel code for Group Announcement.
2
Dial the ID code (if used).
3
Dial the Group code.
4
Hang up.
5
Note:
If ID codes are not used, special dial tone is heard after Step 2.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Group Service Through PMS

Group Service Through PMS
Action
Action
Result
Receive dial tone.
Hear special dial tone.
Hear second dial tone.
Hear special dial tone.
Result
Receive dial tone.
Hear second dial tone.
Hear special dial tone.
Receive service set tone.
G-4
Page 79