NEC NEAX2400 IMX Features Manual page 149

Service Conditions
1. When setting the second wake-up call, the attendant can select whether to set it as AUTOMATIC WAKE-
UP [A-27] service or AUTOMATIC WAKE-UP – HOTEL ATTENDANT ASSISTANCE [A-58]
service.
2. This service can be set/cancelled from the Console or the PMS Terminal (Model 90 and 120 only).
However, when setting from the PMS Terminal, AUTOMATIC WAKE-UP – HOTEL ATTENDANT
ASSISTANCE [A-58] cannot be selected.
3. Original AUTOMATIC WAKE-UP [A-27]/[A-58] service will be referred to as the first wake-up service,
and will be set/cancelled from the guest station.
4. The second wake-up call list is printed on the hotel printer at the predetermined time automatically. The
list excludes those wake-up calls that have already been activated.
5. If the guest station is busy or does not answer when called by this service, the guest station will be recalled.
The number of times to retry is determined in the hotel system parameters.
6. If the guest is identified as the VIP, and if the VIP wake-up service is set, this service operates as the VIP
wake-up service.
7. AUTOMATIC WAKE-UP – HOTEL ATTENDANT ASSISTANCE [A-58] service referred to in this
service operates as the VIP wake-up service.
8. This service cannot be confirmed by the Automatic Wake-Up announcement.
9. Upon answering the second wake-up call, the guest is connected to the recorded announcement.
10. The second wake-up times are to be set at five-minute intervals.
11. This service is cancelled either from the Console, the PMS Terminal, or via MAID STATUS [M-22]
service.
12. The second wake-up call entry and result information is reported to the PMS Terminal (Model 90 and
120). When cancelled automatically via MAID STATUS [M-22] service or called by the attendant in case
of VIP wake-up/AUTOMATIC WAKE-UP – HOTEL ATTENDANT [A-58] service ("ATT CALLED"),
the information is printed by the hotel printer (regardless of its models).
13. The information can be printed by the hotel printer either in one-line or two-line format. (The selection is
to be made in the hotel system parameters.) However, when cancelled automatically via MAID STATUS
[M-22] service or when called by the attendant in case of AUTOMATIC WAKE-UP – HOTEL
ATTENDANT ASSISTANCE [A-58] service ("ATT CALLED"), the information is printed in one-line
format only.
14. When setting AUTOMATIC WAKE-UP – HOTEL ATTENDANT ASSISTANCE [A-58] for the second
wake-up call, the wake-up call can be entered using either 24-hour time or 12-hour time. When using 12-
hour time, the time is entered by dialing a special code (* or #) before entering the time to indicate PM.
Depending on the system data, the wake-up time is displayed either in 12-hour or 24-hour time. (In case
of 12-hour time, either A or P is indicated before the time.)
The LCD on the guest room D
wake-up call is entered using 12-hour time.
Hotel Console
Note: The Second Wake-Up call can be cancelled by the Hotel Console only.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
2nd Wake-up Call – Same Guest Station
term
displays the set second wake-up time in 24-hour time even if the second
Guest Station
ANTK
LC
ATI
Announcement
Machine
Page 137
S-128