Overtime Call - NEC NEAX2400 IMX Features Manual

O-9
General Description
The OVERTIME CALL feature permits the system to measure the length of all outgoing calls, and to print a
message on the hotel printer or alert the Console that the call has exceeded a predetermined time.
Operating Procedure
If the hotel printer is to receive this information, no manual operation is required.
• To operate from the Console:
Step
1 Press the OT or ANSWER key.
If the call is in progress, press the RELEASE
2
key.
If the call is to be forcibly released, press the
3 DEST (destination) key once and the CANCL
key twice.
Service Conditions
1. If the OVERTIME CALL is routed to the Console, the call must be answered, breaking into the
connection.
2. If the OVERTIME CALL notification is to be routed to the hotel printer rather than the Console, this
feature can be selected for Administration Station, guest station, or both stations, depending on system
data.
3. The timer value for OVERTIME CALL is defined by the system data programming (30, 60, 90 or 120
minutes).
4. This feature is not available across a CCIS network.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Overtime Call

Overtime Call
Action
The OT lamp flashes and an incoming audible signal sounds.
A THREE-WAY CALLING [T-3] connection is
established.
Result
O-9
Page 115