Message Waiting - NEC NEAX2400 IMX Features Manual

M-6
General Description
This feature allows the Console, PMS terminal, or Front Desk Terminal to illuminate a lamp on an individual station
to indicate when a message is waiting. With the AUTOMATIC MESSAGE WAITING LAMP OFF [A-48] feature,
the MW lamp is automatically extinguished when the guest calls to retrieve messages from the message center. Refer
to the AUTOMATIC MESSAGE WAITING LAMP OFF [A-48] feature description for details.
Operating Procedure
To set MESSAGE WAITING from the Console or Front Desk Terminal:
•
Step Action
1 Press the MWS (set) key.
2 Dial the guest station number.
3 Press the ENTER key.
4 Press the EXIT key.
term
Note:
If a D is used for a guest station, the following will display:
To cancel MESSAGE WAITING from the Console or Front Desk Terminal:
•
Step Action
1 Press the MWR (reset) key.
2 Dial the guest station number.
3 Press the ENTER key.
4 Press the EXIT key.
term
Note:
If a D is used for a guest station, "MW" display will go out.
Note 1: If an error is made in the course of key operations, press the CLEAR key and continue from Step 2 (station dialing).
Note 2: When performing service setting or cancellation for two or more stations at the same time, follow Steps 1 through 3
for the first station. Follow Steps 2 (Station Dialing) and 3 (ENTER) for the remaining stations, then continue with
Step 4 to exit from the MESSAGE WAITING service mode.
Note 3: DIRECT SERVICE SET/RESET [D-25] is available for this feature. Refer to the feature description for details.
Service Conditions
1. MESSAGE WAITING set from the PMS terminal can display at both the Console and Front Desk
Terminal. If MESSAGE WAITING is cancelled from the Console, it will remain displayed at the Front
Desk Terminal, and vice versa.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Message Waiting

Message Waiting
The associated lamp illuminates.
The console displays the station number.
The lamp flashes to confirm that Message Waiting is set.
The lamp and station display are extinguished.
(Time and Date)
The associated lamp illuminates.
The console displays the station number.
The lamp flashes to confirm Message Waiting cancellation.
The lamp and station display are extinguished.
(Time and Date)
Result
MW
>>>
Result
>>>
M-6
(Note)
(Note)
Page 107