Maid Status - NEC NEAX2400 IMX Features Manual

M-22
General Description
This feature allows the Console, Special Administration, or guest room stations to update the status of guest room
conditions. This information is stored in the NEAX2400 IMX Hotel Processor (HP) for printout services, and is
forwarded to the PMS computer for readout. AUDIT REPORTS [A-26] of MAID STATUS are also available. Refer
to the AUDIT REPORTS [A-26] feature description for details.
The types of room conditions that can be entered are as follows:
To be Cleaned
Cleaned
Ready to Sell
Out of Service
Repair Needed
Repair Complete
Identification codes may be used with all conditions, if required.
Operating Procedure
• Setting MAID STATUS from guest room station; by maid or repairman:
Step
1 Lift the handset.
Dial the Maid Status access code (programmed via
2
MAT).
If the identification code is used, dial the
3
identification code.
4 Hang up.
term
Note: If a D is used for a guest station, the following will display:
Service setting from a Special Administration Station:
•
Step
1 Lift the handset.
2 Dial the Maid Status access code.
If the identification code is used, dial the
3
identification code.
4 Dial the guest room station number
5 Hang up.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Maid Status

Maid Status
Action
SET
(Time and Date)
Action
Result
Hear dial tone.
Hear dial tone.
Hear service set tone, music, or confirmation
announcement. (Note)
>>>
Result
Hear dial tone.
Hear dial tone.
Hear special dial tone.
Hear service set tone. (Note)
M-22
Page 109