NEC NEAX2400 IMX Features Manual page 83

Operating Procedure (cont'd)
For AUDIT REPORTS [A-26]
Idle Condition only:
•
Step
Press the AUD key.
1
Press the STS key.
2
Dial the desired AUDIT code; see AUDIT
3
REPORTS [A-26].
Press the ENT key.
4
Service Conditions
1. A maximum of 32 Front Desk Terminals per Module Group (MG) may be assigned.
2. 16-button or 24-button D
3. Only Special Administration Stations may be Front Desk Terminals.
4. MESSAGE WAITING [M-6] set from a Front Desk Terminal can only be reset from:
5. Front Desk Terminal, PMS Terminal, or Console (Model 60 PMS).
6. Front Desk Terminal or PMS Terminal (Model 90, 120 PMS).
7. During hospitality feature activation, performing any of the following actions will result in the release of
hospitality service setting:
a.) Using SPEED CALLING – ONE TOUCH [S-26D].
b.) Pressing the RECALL key.
c.) Pressing the TRF key.
d.) Pressing the SPKR key.
e.) Pressing the HOLD key.
f.) Pressing a multi-line appearance key.
g.) Lifting the handset off-hook, if it is in idle mode.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
term
D
(Time and Date)
WUS
RCS
My Line
AUD
Figure 6 Example of 16-Button D
Action
term
s shall be used as a Front Desk Terminal.
With Hotel Function
STY HHMM
WUR DDS DDR
RCR
MWS MWR
C/I C/O STS
ENT CE END
term
on a Front Desk Console
The LCD shows the feature abbreviation.
The Audit Report will be printed out on the hotel
printer. See PRINTER CONTROL [P-8].
XXXX
>>>
Result
D-105D
Page 71