NEC NEAX2400 IMX Features Manual page 55

General Description (cont'd)
9. When the called station is engaged in a CO line call and when Central Office code is not assigned:
10. When the called station is engaged in a call with a Hotel Attendant, and specified Attendant Number (1 to
6 digits) is assigned:
11. When the called station is engaged in call with a Hotel Attendant, and Specified Attendant Number is not
assigned:
12. For other status conditions:
Operating Procedure
To operate from the Hotel Console:
•
Step
The attendant dials a station number
1
individually, or while holding a station/trunk.
The attendant presses the STS key.
2
The attendant presses the EXT key.
3
From the status described in either step 2 or 3,
4
the attendant presses the CANCL key
Service Conditions
1. BUSY STATUS DISPLAY – HOTEL ATTENDANT is available only for the Hotel Console.
2. This feature is available only when the called party is a guest station.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Busy Status – Hotel Attendant
STA BUSY
→
XXXX RT:XX
STA BUSY
→
XXXX ATT:XXX
STA BUSY
→
XXXX ATN:X
STA BUSY
→
XXXX BUSY
Action
Receives busy tone or reorder tone according to the
status of the called station.
The current status of the called station displays on the
console LCD.
The console LCD returns to the previous display.
The Attendant is connected to the original party.
•
• The console LCD returns to the initial display.
Result
B-26
Page 43