NEC NEAX2400 IMX Features Manual page 46

A-57
Operating Procedure (cont'd)
Note:
On answering, the station is automatically connected to an announcement machine. If Language service has been
specified by PMS, the guest will receive the announcement in their own language.
Service Conditions
1. A guest station is called every 2 seconds, to a maximum of 24 stations per Module Group ringing
simultaneously. The stations are called in ascending order, based on Line Equipment Number (LEN) per
Module Group (MG). After all stations in a Port Interface Module (PIM) have been called, the process is
repeated in an attempt to reach stations that did not answer, were busy, or were blocked. Unreached
stations will be tried three times by the system.
2. Stations will be retried if the guest does not answer, the line is busy, or the line is in LINE LOCKOUT [L-
3]. Stations in the Make Busy condition are not called. This information is reported to the hotel printer.
3. ALERT SERVICE overrides DO NOT DISTURB [D-11].
4. Special Administration Stations are also called.
5. The ringing pattern used with ALERT SERVICE is shown below. This pattern may not be changed.
6. If a printout of responses (i.e., answered, blocked, busy) is required, the hotel printer must support a
minimum of 220 characters per second (CPS).
7. When announcement trunks for ALERT SERVICE in different languages are provided, the guest receives
the announcement in his/her own language. In this case, the guests are connected to the announcement
trunk in multiple connection, and if the guest does not go on hook after hearing the announcement, the call
is disconnected automatically after 30 seconds.
8. While guest stations are ringing, the LCDs on the guest room D
Page 34
Alert Service
ON 0.4 sec 0.4 sec
OFF
0.2 sec
EMERGENCY CALL
(Time and Date)
0.4 sec 0.4 sec
1 sec 0.2 sec
term
s (if used) will display:
>>>
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2