NEC NEAX2400 IMX Features Manual page 62

C-71
Service Conditions
1. This feature is effective when a station-to-station call or a DID call has been routed to an Console as a
result of DO NOT DISTURB [D-11], CALL FORWARDING – ALL CALLS [C-5], CALL
FORWARDING – BUSY LINE [C-2], CALL FORWARDING – DON'T ANSWER [C-3], or CALL
FORWARDING – INTERCEPT/ANNOUNCEMENT [C-25], and is answered by the Attendant.
2. If the Attendant presses the SRC key while the called station number is displayed, the display changes to
the number of the calling party. The called station number cannot be displayed again.
3. While the called station number is displayed, the Attendant can transfer the call to a desired station by
keying the destination number on the keypad. In this case, the called station number of that call cannot be
displayed again.
4. While the called station number is displayed, the Attendant can place the call on hold by pressing the
HOLD key.
5. While the called station number is displayed, the Attendant can set CALL PARK [C-29] service. The
called station number cannot be displayed again.
6. The Attendant can override the busy guest station by pressing the associated loop key or TKSL key. The
called number and the associated station/route number are displayed on the Console.
Connection
Station A – Station B
Station A – Trunk A
Station A – Trunk A
This service is activated, depending on the hotel system parameters.
Page 50
Called Number Display – Hotel Attendant Console
Overridden Console Key
Party Used
Station A LOOP
Station A LOOP
Trunk A TKSL
Console Display
"Station Trunk No."
Area
Station B. No. Station A name and information
Trunk A. No. Station A name and information
Trunk A No. Station A name and information
NEAX2400 IMX Hotel Features and Specifications
"Room Information"
Area
NDA-24245, Issue 2