NEC NEAX2400 IMX Features Manual page 123

Service Conditions (cont'd)
2. MAID STATUS information from the Console, guest phones, or the Special Administration Station is sent
to the PMS for readout.
3. A maximum of six digits can be used for the identification code (specific maid, repairman, Special
Administration Station). Use of ID codes is optional, and is left to the customer's discretion.
4. When setting this service from a guest room or Special Administration Station, each function code has its
own access code.
5. If "Repair Needed" status is assigned to a room, the room status displays "OUT OF SERVICE".
(Execution of Repair Needed is the same as Out of Service.)
6. If "Repair Completed" status is assigned to a room, the room status displays "READY TO SELL".
(Execution of Repair Completed is the same as Ready to Sell.)
7. When the room is in "Check-In" status, only the "To Be Cleaned" or "Cleaned" status can be assigned.
When the room is in "Check-out" status, any MAID STATUS can be assigned.
8. After the maid or repairman dials Maid Status access code from guest room station, either service set tone
or confirmation announcement can be provided, according to selection by the system. (The announcement
corresponds to each Maid Status access code, so the maid or repairman can confirm the access code he/
she had dialed.) The announcement is connected in multiple connection, and will be disconnected after 30
seconds.
9. PMS Terminals cannot set Maid Status.
10. This service feature is compatible with the MAID STATUS ANSWERBACK [M-68] feature, and both
can coexist in the same system.
11. If an error is made upon dialing the identification code (if used), a reorder tone will be heard.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Maid Status M-22
Page 111