NEC NEAX2400 IMX Features Manual page 148

S-128
Operating Procedure (cont'd)
To cancel the second wake-up call using the WUR key:
When the guest calls in to cancel the second wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
•
Step
Press the WUR key while connected to the guest
1
room.
2 Press the WUR key again.
3 Press the ENTER key.
If the wake-up cancel is entered after the guest line is released:
•
Step
1 Press the WUR key.
2 Press the WUR key again.
3 Dial the guest station number.
4 Press the ENTER key.
• To cancel the second wake-up call for another
guest consecutively, repeat steps 3 and 4.
5
• When all wake-up calls are cancelled, press the
END key.
To set the second wake-up call using the WUS key and the service set code:
•
Step
1 Press the WUS key.
2 Dial the wake-up time requested.
3 Dial the second wake-up set code.
4 Press the ENTER key.
5 Dial the guest station number.
6 Press the ENTER key.
• To set the second wake-up call for another
guest consecutively, repeat steps 5 and 6.
7
• When all wake-up calls are set, press the END
key.
Note 1: In case of using a D
following will display:
term
Note 2: If a D is used for a guest station, the second wake-up time display (if provided) will go out.
Page 136
2nd Wake-up Call – Same Guest Station
Action
Action
Action
term
for a guest station, if the second wake-up time steady display is available by system data, the
(Time and Date)
The character display shows "WAKE UP RESET."
The display shows "2ND WAKE UP RESET".
(Note 2)
The character display shows "WAKE UP RESET."
The display shows "2ND WAKE UP RESET".
(Note 2)
The character display shows "WAKE UP ENT."
The display shows "2ND WAKE UP ENT (A)." or
"2ND WAKE UP ENT (S)." according to the
service set code dialed.
The display shows the station number.
(Note 1)
HH:MM
>>>
NEAX2400 IMX Hotel Features and Specifications
Result
Result
Result
NDA-24245, Issue 2