NEC NEAX2400 IMX Features Manual page 35

Service Conditions (cont'd)
12. When AUTOMATIC WAKE-UP is set from the Administration Station, Front Desk Terminal, or
Console, the LED for AUTOMATIC WAKE-UP on the guest room D
AUTOMATIC WAKE-UP time steady display is available, the following will display:
13. If PMS Language Selection is used, AUTOMATIC WAKE-UP announcements can be provided
according to a guest's language.
14. If all announcement trunks are busy, music will be provided for AUTOMATIC WAKE-UP. Music is
provided by the NEAX2400 IMX MUSIC ON HOLD [M-1] source.
15. For guest stations, a confirmation announcement can be provided instead of service set tone for
AUTOMATIC WAKE-UP setting and cancelling operations.
16. AUTOMATIC WAKE-UP entry and result information is reported, as required, to the PMS and
NEAX2400 IMX hotel printer for continuous update.
17. A maximum of six digits can be used for the identification code. Use of an ID code is not mandatory, and
is left to the customer's discretion.
18. It is possible to use the same access code for both AUTOMATIC WAKE-UP set and cancel. For example,
*1 may be assigned the AUTOMATIC WAKE-UP set and cancel access code. The system will recognize
*1 and wait for the next digit. If 0, 1, or 2 is dialed, then a time is being set. If the 3 is dialed, this is an
AUTOMATIC WAKE-UP cancel.
Example:
*1 0800
*1 1000
*1 2100
*1 3
19. As a system option, once AUTOMATIC WAKE-UP has been set from a guest station, only that guest
station is allowed to cancel or change the WAKE-UP service. This option is determined by system data
(Wake-Up Guest Station Priority Service).
20. These same conditions are applicable to WAKE-UP ANNOUNCEMENT – HEADSTART [W-2].
21. AUTOMATIC WAKE-UP [A-10] and WAKE-UP ANNOUNCEMENT – HEADSTART [W-2]
procedures remain the same.
22. For Distinctive Ringing of AUTOMATIC WAKE-UP, C.O. Line Incoming Connection is used.
23. When several services are set at the same time, services are displayed according to the following order of
priority:
1. AUTOMATIC WAKE-UP - D
2. 2ND WAKEUP CALL – SAME GUEST STATION
3. MESSAGE WAITING
4. DO NOT DISTURB - D
5. ROOM CUTOFF
24. AUTOMATIC WAKE-UP is not activated for the guest station which has been set DO NOT DISTURB -
term
D by using the DND key of a D
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Automatic Wake-Up D
XX:XX
(Time and Date)
8:00 AM wake-up set
10:00 AM wake-up set
9:00 PM wake-up set
wake-up cancel
term
term
Series E.
term
>>>
term
term
illuminates. If the
[A-10D]
[S-128]
[M-6]
[D-11D]
[R-9]
A-10D
Page 23