NEC NEAX2400 IMX Features Manual page 22

NUMBERING PLAN
Commands Related to the Numbering Plan (cont'd)
5. ASPS (Assignment of Special Access Code for Same Number Access)
When Split Access (Same Number Access) is required, these commands are used to specify the kind of
service to be executed or the route to be accessed when a Special Access Code or Trunk Access Code is
dialed.
6. ASPF (Assignment of Special Access Code for Floor Service)
This command is used to assign the calls from Guest stations on each floor, and can be terminated to a
service station, such as laundry service and room service, on the same floor as the Guest Station.
7. AAST/AGST (Assignment of Administration Station Data/Assignment of Guest Station Data)
These commands are used to assign station data. When the system provides the floor service, these
commands are used to assign floor service data with respect to Guest Room Service Station.
Examples of Numbering Plan Data Assignments
Examples of Numbering Plan data assignments are shown below. The procedures for data assignment are explained
in the subsequent pages.
Example:
1. Dial Access Number
For Administration
•
Access Code
"0"
"100" ~ "1000"
"200" ~ "2000"
"3000" ~ "3500"
"4000"
"5000"
"5001"
"9"
• For Guest
Access Code
"0"
"100" ~ "1000"
"200" ~ "2000"
"8"
"9"
2. Others
• Numbering Plan Development Table is provided separately for Administration and Guest.
• Use of "#" code in the Timing Start Service is made effective.
Page 10
Access To
Operator Call
Guest Station on 1F
Guest Station on 2F
Administration Station Number
Special Administration Station
Room Service Station for 1F
Room Service Station for 2F
C.O. Trunk
Access To
Special Administration Station Call
Guest Station on 1F
Guest Station on 2F
Floor Service
C.O. Trunk
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2