NEC NEAX2400 IMX Features Manual page 113

Operating Procedure (cont'd)
Normal END Display:
ROOM INFORMATION
JOHN SMITH
73001 08 30 ENG.
STATION WK TIME LANG
DND RC VIP MW
Abnormal END Display:
ROOM INFORMATION
WAKE UP ENT
73001 08 30
STATION WK TIME
DND RC VIP MW
Figure 13 Example of Service Feature Setting — Attendant Console and Desk Console
Service Conditions
1. This service is available in 1-IMG and 4-IMG systems.
2. The service is available for the PMS Terminal Models 60/90/120.
3. The connection to the host computer is made in the individual office.
4. The same PMS interface model is assigned in every office.
5. When a guest station is enabled to set its own wake-up calls and a log of these settings is desired, then a
hotel printer must be located at the site of the guest station PBX.
6. The central office lines are accommodated in each office. When placing the central office call, the line
accommodated in the same office is used.
7. When a call terminates from the guest in the distant office via the CCIS line, the call terminates on the
GST key of the Console.
8. When a call terminates from the Attendant or the Administration Station in the distant office via the CCIS
line, the call terminates on the ADM key of the Console.
9. When the call is transferred to the Console by CALL TRANSFER – ALL CALLS – CCIS [C-50], the call
terminates on either the ADM or GST key depending on the transferring party.
10. When a call terminates to the Attendant by tandem connection from the individual line to the CCIS line,
the call terminates on the key depending on the trunk class of the individual line.
11. Upon answering the call, the attendant can distinguish whether the call is from the distant office or in the
same office by the number display.
12. If the office code and the station number exceeds six digits, hospitality services cannot be activated over
CCIS by the Console. However, Guest Name Display over CCIS is available.
13. This service is not available in the tandem connection.
14. In case of SERIAL CALL – CCIS [S-52] and SUPERVISORY CALL – CCIS [S-73], Guest Name
Display over CCIS is not available (
15. When originating/answering the calls using the CCIS lines, the RING/ANS lamps are controlled as in case
of the tie line call origination/termination.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Feature Transparency Over CCIS
HH:MM
:STAY
CL0
OCPD
HH:MM
:STAY
NG
LANG
OCPD
NAME
XXXX
XXXX
= USA and Canada only).
H-22
NG
Page 101