NEC NEAX2400 IMX Features Manual page 154

V-16
Operating Procedure (cont'd)
To retrieve a message with operator assistance (attendant only):
•
Step
1 The guest station accesses Voice Mail.
2 Message is retrieved.
When all messages have been retrieved, notification
3 from Voice Mail, by MW-Off command, is sent to
the NEAX2400 IMX via MCI.
Service Conditions
1. The type of port/trunk interface to the voice mail system depends on the type of voice mail system
provided. NEC recommends an analog station (16LCBE) port interface to the voice mail system. These
ports should be programmed in a UCD group.
2. The presence of messages in Voice Mail is controlled completely by the Voice Mail equipment. The
NEAX2400 IMX only carries out message waiting lamp on/off control.
3. Display operations for Console, Front Desk Terminal, and PMS are not performed (i.e. check-in,
checkout, room change recovery do not operate).
4. The NEAX2400 IMX will be notified of message waiting lamp on/off requirements by the Voice Mail
equipment via MCI.
5. The message waiting lamp control feature from MCI is not performed for Suite Room Service. Global
Suite Room guest station message waiting lamp control is also not performed.
6. Message waiting service features for hotel service operate independently of this service.
7. When a guest station has set Call Forwarding – All Calls to another guest station, and the second station
has set Call Forwarding – Busy to the MCI group, calls will be directed to the MCI group when the second
station is busy, but no MCI data is output to Voice Mail.
Page 142
Voice Mail Service Via Message Center Interface (MCI)
Action Result
Guest station's message waiting lamp is turned
off.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2