P-34
P-34
General Description
The PAGING CONSOLE feature allows a Console operator to transfer an incoming call to a PAGING CONSOLE
when the guest is not in his or her room. The PAGING CONSOLE operator pages the guest through the hotel public
address system, requesting him or her to dial a special number from a nearby telephone. When the guest calls, the
PAGING CONSOLE operator connects the guest to the incoming call.
Operating Procedure
Step
The Attendant transfers the incoming call to the paging
console operator using the intertenant special interposition
transfer:
a.) The Attendant dials the Paging Console number.
1
b.) The Paging Console operator presses the
ANSWER key or TF key.
c.) The Attendant presses the RELEASE key.
The Paging Console operator places the incoming call on hold
2
and pages the guest via the external paging unit.
The guest dials the special number from a nearby telephone
3
(intertenant special position call).
The Paging Console operator presses the LOOP key and
connects the guest to the incoming call, then presses the
4
RELEASE key.
Service Conditions
1.
One Console is used as a dedicated PAGING CONSOLE. It can be a business console.
2.
The PAGING CONSOLE uses an exclusive tenant, different from the tenant used by the other Consoles.
3.
The maximum number of combined Consoles and PAGING CONSOLES is:
1 IMG:
4 IMG:
4.
The AUTOMATIC RECALL [A-8] timer default is normally set at a maximum of 3 minutes.
5.
The paging unit is to be provided by the customer.
Page 120
Paging Console
Paging Console
Action
Maximum of 16
Maximum of 60
Result
The Attendant can talk to the Paging
Console operator.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2