Direct Page Connection - NEC NEAX2400 IMX Features Manual

D-23
General Description
This feature allows direct loop-to-loop connection for paging, enabling the Attendant to hold an incoming (IC) call,
page the desired party, then directly connect both parties after the paged party answers.
Operating Procedure
For IC call on a loop requiring paging:
•
Step
The Attendant presses the HOLD key. The call is
1
held on a loop.
The Attendant presses the PG key, or dials the
access code, then pages the desired party. (The
2
Attendant holds the PG key down for the duration
of the page).
To connect the held party to the paged party, (via HOUSE PHONE [H-8] or dial "0"):
•
Step
The Attendant presses the held LOOP key, then
presses either:
a.) The RELEASE key
1
b.) The TALK key
To release, the Attendant presses the RELEASE
2
key.
Service Conditions
1. In a MULTIPLE CONSOLE OPERATION [M-4], paged party responses are directed to the proper
Attendant via the INTER-POSITION TRANSFER [I-5] feature.
2. This feature is also available for internal calls.
3. The PA-M87 (DPI: Direct Page Interface) is required if the Console PG key is used.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Direct Page Connection

Direct Page Connection
Action
Action
Result
The call is held on a loop.
Result
Connects the paged and held parties
immediately.
Connects the paged party, held party, and the
Attendant in a THREE-WAY CALLING [T-2]
connection.
D-23
Page 61