NEC SL2100 Programming Manual page 35

ISSUE 2.0
Item No. Item
02 Logical Port Number
03 Connection Type
04 Layer 3 Timer Type
05 Calling Party Number
06 Connection Bus Mode
07 S-point DDI digits
08 Dial Sending Mode
09 Dial Information Element
10 Master/Slave System
14 Service Protocol for S-point 0 = Keypad facility
15 Call Busy Mode for S-point
17 ISDN Line Ringback Tone
18 Type of Number
19 Numbering Plan Identifica-
tion
25 Layer 1 Supervision
26 Screening Indicator
(V1.5 added)
Programming Manual
Input Data
[0 : No Setting] = 0
[1 : T-Point] = 1 ~ 128
[2 : S-Point] = 1 ~ 128
[3 ~ 5] = Not Used
[6 : S-Point (Leased Line)] = 1 ~ 128
0 = Point-to-Multipoint
1 = Point-to-Point
1 ~ 5
0 = No
1 = Yes
0 = Extended passive bus
1 = Short passive bus
0 ~ 4
0 = Enblock Sending
1 = Overlap Sending
0 = Keypad Facility
1 = Called Party Number
0 = Slave System
1 = Master System
1 = Specified Protocol
0 = Alerting
1 = Disconnect
0 = Disable
1 = Enable
0 = Unknown
1 = International number
2 = National number
3 = Network specific number
4 = Subscriber number
5 = Speed Dial number
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0 = Disable
1 = Enable
0 = user-provided (not screened)
1 = user-provided (verified and
passed)
2 = user-provided (verified and failed)
SL2100
Description Default
The starting port
number of a BRI line
is displayed. Two
logic ports are auto-
matically assigned to
a BRI line.
Each timer value of
Layer 3 is set up for
every type using Pro-
gram 81-06 (T-Bus).
Based on this setting, the
system includes a Pre-
sentation Allowed (1) or
Presentation Restricted
(0) in the Setup message
to allow or deny the Call-
ing Party Number. Pro-
gram 15-01-04 must also
be set to 1 if this option is
enabled.
ISDN Protocol definition
ISDN Protocol definition
[Only when Dial Sending
Mode (10-03-08) is set for
1 (Overlap Sending]
If set to 0, system is
synchronized to network
clock. If set to 1, system
is not synchronized to the
network clock.
System can provide ring-
back tone, if set to 1 : En-
able.
ISDN Protocol definition
ISDN Protocol definition
Calling Party Number in-
formation element
Screening indicator (octet
3a)
0
0
1
Program
1
10
0
0
1
1
0
0
0
0
0
0
0
0
2-11