ISSUE 2.0
Level:
IN
Description
Use Program 13-01 : Speed Dialing Function Setup to define the Speed Dialing functions.
Input Data
Item
Item
No.
01
Speed Dialing
Auto Outgoing
Call Mode
02
Station Speed Di-
al
03
Common Speed
Dial Table Size
04
Trunk Access
Routing
Conditions
None
Feature Cross Reference
• Speed Dial
Programming Manual
Program 13 : Speed Dial
13-01 : Speed Dialing Function Setup
Input Data
0 = Trunk Outgoing
Set where the Speed Dial bins will
Mode (Use trunk group
use Trunk Routing (0) or dial the bin
assigned in PRG
as though it is an Intercom number
13-05.)
(1).
1 = Intercom Outgoing
Mode (Follow the sys-
tem routing for the
trunk access code en-
tered.)
0 = Do not use
Define use additional 100 Private
1 = Use
speed dial bin beside 1000 Com-
mon speed dial bin or not.
100 ~ 1000
Assign the number of Speed Dial
0 = No Common Speed
bins that are used for System Speed
Dialing (No System
Dials.
Speed Dial)
0 = Trunk Group
0 = PRG13-05 defines a trunk group
1 = Trunk Route
in PRG14-05 to select a trunk from.
1 = PRG13-05 refers to a trunk ac-
cess route in PRG14-06.
Description
Default
SL2100
Program
13
Related
Program
0
13-05
1
13–06
900
13-04
0
2-105