Figure 2-48 Removing The L-Bracket - NEC SL1100 Hardware Manual

ISSUE 1.0
Two screws
(M4 X 8)
3. Turn the L-Bracket upside down.
Rotate the L-Bracket 180 degrees so that the upper FACE as shown in
the L-Bracket on this page
L-Bracket and WM Hook on the next
4. Insert tabs on Battery Box into holes on L-Bracket.
Secure the L-Bracket to the Battery Box using two screws.
5. Using two screws (M4x8), secure the WM Hook to the L-Bracket.
6. Using two anchor bolts (locally procured), secure the WM Hook to the wall.
The WM Hook is required for securing both Floor-mount and Wall-mount cases.
Hardware Manual

Figure 2-48 Removing the L-Bracket

is located at the bottom as shown in
page.
L-Bracket
Figure 2-48 Removing
Figure 2-49 Securing the
SL1100
2-31