ISSUE 1.0
Two screws
4. Press tab A and lift the CPU support bracket.
5. Insert the EXIFB-C1 PCB into the J1 connector on the 084M-B1 at 1228M-B KSU.
6. Close the CPU support and make sure the tab A locks into place.
7. Cut and remove the Plastic Knockouts as needed for Expansion KSU.
Main-Cover
8. Replace the Main-Cover and fasten two screws.
Hardware Manual
Main-Cover
Hooks
Figure 2-13 Removing the Main-Cover
CPU support
A
084M-B1 at 1228M KSU
Figure 2-14 EXIFB-C1 PCB Installation
Figure 2-15 Removing the Plastic Knockouts
EXIFB-C1 PCB
J1
Plastic Knockouts
SL1100
CPU support
2-9