SL1100
5.2 Install the IP Multiline Telephone (IP4WW-24TIXH-C1 TEL)
5.2.1 System Connection
The IP Multiline Telephone is connected via HUB.
KSU
VOIPDB-C1
board (CN1)
5.2.2 Installing the IP Multiline Telephone
1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.
2. If the Power feeding is used by AC-[ ] UNIT, plug the AC-[ ] UNIT cable to the DC input jack on the
IP Multiline Telephone Base.
3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connect
the 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connector
and to the PC.
5.2.3 Applying Power to the IP Multiline Telephone
IP Multiline Telephone (IP4WW-24TIXH-C1) supports two different power sources for the Telephone.
• AC-2R UNIT/AC-L UNIT
2-62
LAN Cable
(10BASE-T/100BASE-TX)
Ferrite Core
Hub
Commercial Power
Figure 2-98 IP Multiline Telephone Connection
PC(X)
LAN(=)
< Bottom view>
Figure 2-99 IP Multiline Telephone Connectors
IP Multiline Telephone
Exit
1
GHI
4
PQRS
7
Speaker
LAN(=) Connector
PC (X)Connector
AC-[ ]
UNIT
PC
Commercial Power
PC(X)
LAN(=)
ISSUE 1.0
Help
ABC
DEF
Flash
Transfer
2
3
JKL
MNO
Mute
DND
5
6
TUV
WXYZ
Clear/Back
8
9
0
Hold
Installation