Loading The Customer Data; Figure 3-10 Inserting The Cf Card; Figure 3-11 Prg90-03 Display; Figure 3-12 Prg90-04 Display - NEC SL1100 Hardware Manual

ISSUE 1.0
CF card
2. Turn the power on, enter the Program Mode then PRG90-03.
Program Mode
Base Service OP1 OP2
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display will be changed to the next PRG.
Saving System Data
5. Remove the CF Card and exit from the Programming Mode.
The saved data on CF Card cannot be edited by the PC.

2.4 Loading the Customer Data

The backed up customer data can be loaded to the system by CF Card.
1. Turn the power off, insert the Customer Data CF card into the CF Slot on VMDB.
Hardware Manual

Figure 3-10 Inserting the CF card

90-03-01
Data Save YES:1 1

Figure 3-11 PRG90-03 Display

90-04-
Load Data

Figure 3-12 PRG90-04 Display

CPU card
CF Slot (CN2)
VMDB
'
M tenance
back Select
SL1100
|01
3-5