Removing The Disk Expansion Unit From The Rack - NEC Storage ST1220 User Manual

User Guide

Removing the Disk Expansion Unit from the Rack

Enlist the help of at least one person to remove the Disk Expansion Unit from the rack.
Always observe the following cautions to use the Disk Expansion Unit safely.
Failure to follow these cautions may cause personal injury including burns
and/or physical damages. Refer to the Safety Notes section for more
information.
Do not lift the Disk Expansion Unit by yourself.
Do not pinch your fingers with mechanical components.
Do not pull out a device from the rack if the rack is unstable.
Do not pull out from the rack more than one device at a time.
Do not use the handle or the front bezel to lift the unit.
1. After confirming that the power of the NEC Express server and the Disk Expansion Unit
are set to OFF, disconnect the power cable and all the interface cables connected to the
Disk Expansion Unit.
2. Unlock the security lock of the front bezel.
3. Slide the knob to remove the front bezel.
Front bezel knob
CAUTION
38
www.nec-computers.com