User Guide
1. Plug the SAS interface cable into the SAS connector located to the left of the IO module.
IMPORTANT: Although there are three SAS connectors
on the IO module of the Disk Expansion Unit, use only the
one completely to the left for this connection.
2. Fasten the knob screws using your fingers to secure the connector.
3. Fix the SAS interface cables by using cable ties as appropriate.
Cable Connections (Example)
Disk array
controller
NEC Express
server
SAS cable
41
Knob screw
I/O module
Disk expansion unit
www.nec-computers.com