Door Hinge Adjustment; Removing The Hinge Opening Cover; Removing The Door Hinge; Removing The Upper Door Trim - Electrolux Next Gen 30" Service Manual

Door hinge adjustment:

1. Each side of the door may be raised by adjusting
the screw in the end of each hinge.
Oven door adjustment screw
Removal of the hinge opening cover:
1. The top of the hinge opening cover is tab and is slid
behind the front frame. The bottom of the hinge
opening is held to the front frame by the top hinge
screw.
Hinge cover
Door hinge removal:
Note: There is a left and right door hinge.
1. Remove the two screws holding the hinge to the
front frame.
2. Collapse the hinge, push down and tip the bottom of
the hinge toward the back of the range.
Door mounting hinge screws
3. When the top of the inner hinge go below the opening
in the front frame pull the hinge out.
Oven door disassembly:

Removing the upper door trim:

1. Remove the oven door and lay it on a flat surface.
2. Remove the two screws holding the trim to the inner
liner.
3. Slide the trim off the top of the door.
Trim screws

Removing door handle:

1. Remove upper door trim.
2. Remove the two screws holding the door handle to
the upper door trim.
102