Minute Timer; To Change The Minute Timer While It Is In Use; To Cancel The Minute Timer Before The Set Time Has Run Out; Oven Lockout Feature - Electrolux Next Gen 30" Service Manual

Minute Timer:

The minute timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The minute timer can be used
during any of the other oven functions. The minute timer
can be set for any amount of time from 1 minute to 11
hours 59 minutes in the 12 or 24 hour modes.
To Set the Minute Timer:
1. Press Timer On/Off , "0:00" and "TIMER" will flash
in the display.
2. Push the number pads to set the desired time in the
display Press Start , the time will begin to count
down and "TIMER" will glow in the display. Note: If
Start is not pressed the timer will return to the time
of day.
3. When the set time has run out, "END" will show in
the display and 3 beeps, every 60 seconds, will
sound until Timer On/Off is pressed.

To Change the Minute Timer while it is in use:

1. Press Timer On/Off and enter the new time using
the number pads then press Start to start with the
new time.
To Cancel the Minute Timer before the set time has
run out:
1. Press and hold Timer On/Off . The display will return
to the time of day.

Oven Lockout Feature:

The Oven Lockout feature prevents the oven from being
accidentally turned on. It does not disable the clock,
minute timer, or surface elements (or) burners. It disables
the oven light switch, but the oven light will turn on if the
oven door is opened.
To activate the Oven Lockout:
1. Press and hold Lock for three seconds.
2. After 3 seconds the lock icon light will come on and
"DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator
will quit flashing and remain on along with the lock
icon light.

To reactivate Oven operation:

1. Press and hold Lock for three seconds. A beep will
sound and the lock icon light will clear and the time
of day will be shown. The "DOOR LOCKED" will
continue to flash until the oven door has completely
unlocked.
2. The oven control may then be programmed for all
operations.
Temperature Display - Fahrenheit or Celcius:
The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. Your range has
been preset at the factory to display in Fahrenheit.
To change from Fahrenheit to Celsius or Celsius to
Fahrenheit:
1. Identify which display your control is set for now. To
tell if your range is set for Fahrenheit or Celsius press
Broil and hold for 7 seconds. A beep will then sound.
If "F" appears, the display is set to show
temperatures in Fahrenheit. If "C" appears, the
display is set to show temperatures in Celsius.
2. Press Clean to toggle between the Fahrenheit to
Celsius display mode. The display will show either
"F" (Fig. 4) or "C".
3. Press Start to accept the change or press Clear
Off to reject the change.

Silent Control Operation:

The silent operation feature allows the control to be
operated without sounds or beeps whenever necessary.
If desired the control can be programmed for silent
operation and later returned to operating with all the normal
sounds and beeps.
To change control from normal sound operation to
silent control operation:
1. Identify which sound operation your control is set for
now. To tell if your range is set for normal or silent
operation press and hold Stop Time for 7 seconds.
"DELAY" will flash in the display. If ":SP" appears,
the control will operate with normal sounds and
beeps. If ":—" appears, the control is in the silent
operation mode.
2. Press Clean to toggle between the normal sound
operation and silent operation mode. The display
will show either ":SP" or ":—".
3. Press Start to accept the change or press Clear
Off to reject the change.
74