The Es 400 Electronic Oven Control System; How To Program The Es 400; Clock; To Set The Clock - Electrolux Next Gen 30" Service Manual

Freestanding
Hide thumbs Also See for Next Gen 30":
Table of Contents

Advertisement

THE ES 400 ELECTRONIC OVEN CONTROL SYSTEM

The ES 400 electronic oven control system is used to
control the oven on self-cleaning model ranges with the
convection feature.
The oven can be programmed to: BAKE, TIME
BAKE, BROIL, CONVECTION BAKE, CONVECTION
ROAST, SELF-CLEAN, CONTINUOUS BAKE and SET
FOR OVEN LOCKOUT.

HOW TO PROGRAM THE ES 400

Clock:

The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for
12 hour operation. When the range is first plugged in, or
when the power supply to the range has been interrupted,
the timer in the display will flash and PF (power failure)
will appear in the display.
To set the Clock (example 1:30):
1. Press Clock . "CLO" will appear in the display.
2. Press the numbers 1, 3, 0 to set the time of day to
1:30. "CLO" will disappear after 4 seconds and the
clock will start. Or,you may press Start. "CLO" will
disappear and the clock will start.

Changing between 12 or 24 hour time of day display:

1. Press and hold Clock for 6 seconds a beep will
sound.
2. The display will show 12:00 to indicate the 12 hour
time of day operation is active.
3. Press Clean to toggle between the 12 and 24 hour
time of day display. The display will show either
12:00 or 24:00.
4. Press Start to accept the change or press Clear/
Off.
5. Reset the correct time as described in To set the
Clock.
Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00 through
24:00 hours.
To set the control for continuous bake or 12 Hour
Energy Saving:
1. Press and hold Timer On/Off for 7 seconds, ":—"
or ":24" will appear in the display and the control will
beep once.
2. Press Clean to toggle between the 12 Hour Energy
Saving and continuous bake features.
Note: "12" in the display indicates the control is set for
the 12 Hour Energy Saving mode and "--" indicates the
control is set for the continuous bake feature.
3. Press Start to accept the change or press Clear/
Off to reject the change.

Minute Timer:

The minute timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The minute timer can be used
during any of the other oven functions. The minute timer
can be set for any amount of time from 1 minute to 11
hours 59 minutes in the 12 or 24 hour modes.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

30” gas freestanding ranges

Table of Contents