Nic Indicator Codes - Dell DL4000 Owner's Manual

Item Indicator, Button, or
Connector
2 System identification
connector
3 iDRAC7 Enterprise port
4 PCIe expansion card slot
(riser 1)
5 Serial connector
6 Video connector
7 PCIe expansion card slot
(riser 2)
8 USB connectors (2)
9 Ethernet connectors (4)
10 PCIe expansion card slot
(riser 3)
11 Power supply (PSU1)
12 Power supply (PSU2)

NIC indicator codes

Figure 4. NIC Indicator
1. link indicator
Icon Description
To reset iDRAC (if not disabled in F2 iDRAC setup)
press and hold for more than 15 seconds.
Allows you to connect the optional system status
indicator assembly through the optional cable
management arm.
Dedicated management port.
NOTE: The port is available for use only if the
iDRAC7 Enterprise license is installed on your
system.
Allows you to connect a Fibre Channel or PERC
H810 card.
Allows you to connect a serial device to the
system.
Allows you to connect a VGA display to the system.
Allows you to connect a PCIe expansion card.
Allows you to connect USB devices to the system.
The ports are USB 2.0-compliant.
Four integrated 10/100/1000 Mbps NIC
connectors
Allows you to connect a PCIe expansion card.
750 W
750 W
2. activity indicator
11