Cooling Shroud; Removing The Cooling Shroud - Dell DL4000 Owner's Manual

Figure 8. Inside the system
1. control panel
3. cooling fans (7)
5.

cooling shroud

7. chassis intrusion switch
9. network daughter card
11. storage controller card
13. DIMMs (8)
15. hard-drive backplane
Cooling shroud

Removing the cooling shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
1. Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet and peripherals.
2. Open the system.
3. Hold the touch points and lift the shroud away from the system.
2. cable securing clip
4. cable securing bracket
6. power supplies (2)
8. riser card 3
10. riser card 1
12. network daughter card cooling shroud
14. heat sink for processor 2
16. hard drives (10)
31