Embedded System Management; Idrac Settings Utility; Entering The Idrac Settings Utility - Dell DL4000 Owner's Manual

Hide thumbs Also See for DL4000:

Table of Contents

NOTE: You can use the Password Status option in conjunction with the Setup Password option to

protect the system password from unauthorized changes.

Embedded system management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the

server's lifecycle. The Lifecycle Controller can be started during the boot sequence and can function

independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by the

Lifecycle Controller.

For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and

deploying the operating system, see the Lifecycle Controller documentation at dell.com/support/home.

The iDRAC Settings utility is an interface to setup and configure the iDRAC parameters using UEFI. You

can enable or disable various iDRAC parameters using the iDRAC Settings Utility.

For more information on using iDRAC, see the iDRAC7 User's Guide under Software → Systems

Management → Dell Remote Access Controllers, at dell.com/support/manuals.

Turn on or restart the managed system.

Press <F2> during Power-on Self-test (POST).

In the System Setup Main Menu page, click iDRAC Settings.

The iDRAC Settings screen is displayed.

Table of Contents