Dell DL4000 Owner's Manual page 93

Hide thumbs Also See for DL4000:
Table of Contents

Advertisement

Error Code
Message Information
PDR0001
Message
Details
Action
PDR1016
Message
Details
Action
PST0128
Message
Details
Action
PST0129
Message
Details
Action
PSU0001
Message
Action
PSU0002
Message
Details
Action
PSU0003
Message
Details
Fault detected on drive <number>.
The controller detected a failure on the disk and has taken
the disk offline.
Remove and re-seat the failed disk. If the issue persists, see
Getting
Help.
Drive <number> is removed from disk drive bay <bay>.
The controller detected that the drive was removed.
Verify drive installation. Re-seat the failed drive. If the issue
persists, see
Getting
Help.
No memory is detected.
System BIOS was unable to detect memory in the system.
Re-seat the memory modules. If the issue persists, see
Getting
Help.
Memory is detected, but is not configurable.
System BIOS detected memory, but was unable to configure
the memory for system operation.
Compare system memory installation to supported system
memory configurations.
Power supply <number> failed.
Remove and reinstall the power supply. If the issue persists,
see
Getting
Help.
A predictive failure detected on power supply <number>.
System performance and power redundancy may be
degraded or lost.
Remove and reinstall the power supply at the next service
window. If the issue persists, see
The power input for power supply <number> is lost.
The power supply is installed correctly but an input source is
not connected or is not functional.
Getting
Help.
93

Advertisement

Table of Contents
loading

Table of Contents